You’ve been dreaming of that new deck for months, and finally it’s here! If you’re lucky enough to own your own home, there’s nothing better than working on personal projects like this one. But before you throw down some stain and start painting, take some time to plan out the project. You don’t have to be an expert to get the job done right follow these tips for staining your deck the right way:
Do a preliminary cleaning.
Before you start staining your deck, doing a preliminary cleaning is important. Use a pressure washer to remove dirt and grime from the wood. If you don’t have access to this kind of equipment, use a deck cleaner instead Be sure to test it first on an inconspicuous area of your deck so that you know how well the product works before using it on the entire surface. After treating the wood with cleaner, give it time to dry completely before moving onto step two: scrubbing away any remaining stains with an abrasive brush (like one made specifically for cleaning decks). Finally comes staining itself; this part requires patience and care for results that look good over time!
Read More: How to Keep Your Wood Dry When Storing for Firewood
Seal the wood.
Sealing the wood is an essential part of staining your deck the right way. If you don’t seal your deck, it will become susceptible to wood rot and insect damage. Wood rot occurs when moisture seeps into the wood, which then causes fungi or mold to grow inside of it. This can cause further damage to your deck boards and posts over time if not treated properly. In addition to preventing this kind of damage, sealing helps protect against fading, sun damage, and water damage (which we’ll discuss next).
Stain it before you paint.
If you’re going to paint your deck, consider staining it first. This is because applying stain is much simpler than painting and can be completed in less time. Staining also helps protect your wood from the sun’s UV rays and other elements like rain or snow that could damage it over time.
If you decide to go this route, make sure that whatever type of stain you choose will provide the protection needed for your area’s climate conditions–you don’t want a beautiful new look only to have it fade after just a few years!
Don’t forget the railings, too.
While you’re at it, don’t forget to stain the railings. The stairs leading up to your deck are often overlooked when it comes to stain or paint a deck. But if you want your guests’ experience on your outdoor space to be pleasant and safe.
Then be sure to give them something sturdy and attractive to hold onto while making their way up or down those steps. Handyman Services in New Jersey can help you stain your deck carefully so that it looks great for years!
Clean up any spills immediately.
- Clean up any spills immediately.
- Use a wet/dry vacuum to clean up the stain if possible. If you don’t have one, use paper towels to soak up as much of it as possible and dispose of them properly. Don’t try to clean up stains with soap and water; this will only worsen them!
Staining your deck can be easy when you know what to do and when!
- Stain before painting. It’s best to stain your deck before painting it, as the stain will help protect the wood from UV damage and keep it from splintering or cracking in the future.
- Use a roller or brush for application. You can use either a roller or brush for applying stain, but we recommend using a foam paint brush like this one if you don’t want any drips on your freshly stained wood surface–make sure not too much of this type of product touches any part of your house (or anything else).
- Get ready with some old clothes on hand so they don’t get stained as well while doing this job!
Also Read: How to make the Aluminum Shutters last long?
Conclusion
So, there you have it. Now you can enjoy your beautiful new stain job and know it will last for years!
Read More: 8 Best LED Strip Lights Ideas For Brightening Your Space
